10PCS ATMEL SOP-8 ATTINY85-20SU Tiny85-20SU CHIP IC


Product Description
 

ATtiny85-20SU characteristics:
High Performance, Low Power AVR 8-Bit Microcontroller
Advanced RISC Architecture
- 120 Powerful Instructions
- Most Single Clock Cycle Execution
- 32 x 8 General Purpose Working Registers
- Fully Static Operation
Non-volatile Program and Data Memories
- 8K Byte of In-System Programmable Program Memory Flash (ATtiny85/ATtiny85V)
Endurance: 10,000 Write/Erase Cycles
- 512 Bytes In-System Programmable EEPROM (ATtiny85/ATtiny85V)
Endurance: 100,000 Write/Erase Cycles
- 512k Bytes Internal SRAM (ATtiny85/ATtiny85V)
- Programming Lock for Self-Programming Flash Program and EEPROM Data Security
Peripheral Features
- 8-bit Timer/Counter with Prescaler and Two PWM Channels
- 8-bit High Speed Timer/Counter with Separate Prescaler
2 High Frequency PWM Outputs with Separate Output Compare Registers
Programmable Dead Time Generator
- USI - Universal Serial Interface with Start Condition Detector
- 10-bit ADC
4 Single Ended Channels
2 Differential ADC Channel Pairs with Programmable Gain (1x, 20x)Temperature Measurement
- Programmable Watchdog Timer with Separate On-chip Oscillator
- On-chip Analog Comparator
Special Microcontroller Features
- debugWIRE On-chip Debug System
- In-System Programmable via SPI Port
- External and Internal Interrupt Sources
- Low Power Idle, ADC Noise Reduction, and Power-down Modes
- Enhanced Power-on Reset Circuit
- Programmable Brown-out Detection Circuit
- Internal Calibrated Oscillator
I/O and Packages
- Six Programmable I/O Lines
- 8-pin PDIP, 8-pin SOIC and 20-pad QFN/MLF
Operating Voltage
- 1.8 - 5.5V for ATtiny85V
- 2.7 - 5.5V for ATtiny85
Speed Grade
- ATtiny85V: 0 - 4 MHz @ 1.8 - 5.5V, 0 - 10 MHz @ 2.7 - 5.5V
- ATtiny85: 0 - 10 MHz @ 2.7 - 5.5V, 0 - 20 MHz @ 4.5 - 5.5V
Industrial Temperature Range
Low Power Consumption
- Active Mode:
1 MHz, 1.8V: 300 ¦ÌA
- Power-down Mode:
0.1¦ÌA at 1.8V